User's Rides
|
dan
1989 Mustang GT wallace, NC - United States Blue/silver with grey Interior Modifications: Moderate ET Range: Never Run It! NMRA Participant |
| Current Media Files | |
|
|
|
| Engine Specifications | |
| Block: | Stock |
| Bore: | Stock |
| Stroke: | Stock |
| Cubic Inches: | 302 |
| Crankshaft: | Stock |
| Compression: | Stock |
| Rods: | Stock |
| Pistons: | Stock forged |
| Rings: | Stock |
| Bearings: | clevite 77 |
| Camshaft: | lunati blower cam |
| Timing Chain: | FMS |
| Rockers: | 1.6/1.7 split ratio trickflow roller rockers |
| Lifters: | Stock |
| Pushrods: | hardened comp cams |
| Oil Pump: | FMS high volume |
| Oil Pan: | Stock |
| Ignition: | msd 6btm |
| Pulleys: | stock |
| Crank Dampner: | fluid dampner |
| Engine Mounts: | energy suspension |
| Radiator: | Heavy Duty Copper |
| Fan: | stock |
| Water Pump: | airtex |
| Miscellaneous: | Good Year hoses FMS wires Uridium plugs |
| Cylinder Head Specifications | |
| Brand & Model: | FMS GT-40X |
| Valves: | Stainless |
| Port Work: | moderate |
| Components: | Stock |
| Gaskets: | Felpro o-ring |
| Miscellaneous: | None |
| Exhaust System Specifications | |
| Headers: | bbk shorty |
| H-Pipe: | bassani x-pipe w/cats |
| Mufflers: | flow master cat-back |
| Tailpipes: | Stock |
| Miscellaneous: | None |
| Induction System Specifications | |
| Intake: | Kenne Bell |
| Port Work: | Mild |
| T-Body / Carb: | 70 mm |
| Mass Air: | 73mm |
| Air Filter: | k&n |
| Ram Air: | Cervini's |
| Miscellaneous: | None |
| Power Adder Specifications | |
| System Type: | Supercharged |
| System Manufacturer: | Kenne Bell Twin Screw |
| Pulley / Jet Size: | 2' should be 14 psi |
| Boost / Nos Output: | will peak @18 psi |
| Miscellaneous: | BEGI adjustable FMU |
| Fuel System Specifications | |
| Fuel Pump(s): | 255 lph |
| Fuel Lines: | Stock |
| Fuel Rails: | Stock |
| Injs / Carb Jets: | 30 lb |
| Regulator: | BBK |
| Driver Type (CPU): | Stock |
| Computer Add-ons: | Air adjuster |
| Miscellaneous: | None |
| Drivetrain Specifications | |
| Transmission: | tremec 3550 |
| Flywheel / Converter: | centerforce billet |
| Clutch Setup: | Zoom |
| Driveshaft: | FMS aluminum |
| Axles: | Stock |
| Differential: | Stock |
| Gear Set: | 3:27 |
| Shifter: | hurst |
| Miscellaneous: | None |
| Chassis Specifications | |
| Springs: | Stock |
| Sway Bar Setup: | Stock |
| Rims: | 4-lug ponies |
| Tires: | 225/50 r16 (front) 225/55 r16 (rear) 255/50r16(drag radials) |
| Subframe Connectors: | kenne brown |
| Roll Bar / Cage: | none |
| Traction Devices: | bbk upper & lower rear arms |
| Miscellaneous: | Power Slot rotors on the fronts |
| Body Specifications | |
| Hood Type: | mach 1... 3' cowl |
| Spoiler Type: | stock |
| Miscellaneous: | street heat II cowl |
| Interior Specifications | |
| Interior: | grey |
| Tach / Shift Lite: | Stock |
| Gauges: | Stock |
| Stereo System: | Panasonic am/fm/cd/dvd audio video, MB Quart |
| Alarm System: | Viper 800ESP |
| Miscellaneous: | billet accessories |
| General Specifications | |
| Amount Driven: | Nice Weather |
| Vehicle Weight: | Stock |
| Chassis Dyno HP: | Unknown |
| Chassis Dyno Torque: | Unknown |
| BEST 60 ft Time: | 2.074 |
| BEST 1/4 ET: | 13.727 w/ stock motor and blower |
| BEST 1/4 MPH: | 104.62 |
| Extra Information from the Owner | |
|
Have not run the car with new Heads, cam, gears, injectors, and adjustable FMU
|
|
Return to the User's Rides listings index.
