User's Rides
|
Steve Blackowiak
1987 Mustang GT Elk River, MN - United States Charcoal Gray with Gray/Black Interior Modifications: Moderate ET Range: 12.0 - 12.9 |
| Current Media Files | |
|
|
|
| Engine Specifications | |
| Block: | Stock, w/Probe main support |
| Bore: | .030 over |
| Stroke: | Stock |
| Cubic Inches: | 306 |
| Crankshaft: | Stock |
| Compression: | 9.5:1 |
| Rods: | Reconditioned stock w/ARP fasteners |
| Pistons: | TRW forged flat tops |
| Rings: | TRW |
| Bearings: | TRW |
| Camshaft: | Lunati custom grind, .522 lift |
| Timing Chain: | FMS |
| Rockers: | Lunati adjustable 1.6 |
| Lifters: | Stock |
| Pushrods: | Crane Hardened |
| Oil Pump: | Melling Hi-Volume |
| Oil Pan: | Stock |
| Ignition: | Crane Hi-6, PS-91 coil |
| Pulleys: | Stock |
| Crank Dampner: | Stock |
| Engine Mounts: | Heavy Duty convertible |
| Radiator: | Ron Davis Aluminum |
| Fan: | Black Magic electric |
| Water Pump: | Edelbrock |
| Miscellaneous: | AC delete, air pump delete, battery relocated to hatch, March alternator and power steering pump mounting kit |
| Cylinder Head Specifications | |
| Brand & Model: | Edelbrock 6037 |
| Valves: | 1.9 intake |
| Port Work: | none |
| Components: | Stock |
| Gaskets: | Fel-Pro |
| Miscellaneous: | Push rod guide plates, locking nuts |
| Exhaust System Specifications | |
| Headers: | Texas Turbo 1-5/8' long tubes, jethot coated |
| H-Pipe: | Texas Turbo 2-1/2' off road |
| Mufflers: | MAC Flow Path |
| Tailpipes: | MAC 2-1/2' |
| Miscellaneous: | None |
| Induction System Specifications | |
| Intake: | GT-40 |
| Port Work: | none |
| T-Body / Carb: | 65mm |
| Mass Air: | Pro-M 75mm |
| Air Filter: | K & N Cone |
| Ram Air: | March |
| Miscellaneous: | 1/2' phenolic spacer & Tiny Avenger Intake Tube |
| Power Adder Specifications | |
| System Type: | Naturally Aspirated |
| System Manufacturer: | Stock |
| Pulley / Jet Size: | Stock |
| Boost / Nos Output: | Stock |
| Miscellaneous: | None |
| Fuel System Specifications | |
| Fuel Pump(s): | 190 lph |
| Fuel Lines: | Stock |
| Fuel Rails: | Stock |
| Injs / Carb Jets: | 24 lb/hr |
| Regulator: | Paxton adjustable |
| Driver Type (CPU): | Stock |
| Computer Add-ons: | JMS custom burned chip |
| Miscellaneous: | None |
| Drivetrain Specifications | |
| Transmission: | Tremec 3550 |
| Flywheel / Converter: | Stock |
| Clutch Setup: | Centerforce dual friction |
| Driveshaft: | FMS Aluminum |
| Axles: | 31 Spline Moser |
| Differential: | FMS 31 Spline Traction Lok |
| Gear Set: | 3.73 |
| Shifter: | Pro 5.0 |
| Miscellaneous: | Poly transmission mounts |
| Chassis Specifications | |
| Springs: | Eiback Progressive |
| Sway Bar Setup: | Stock |
| Rims: | 96 Cobra 17' x 8' |
| Tires: | 245/45/17 Sumitomo HTRZ II |
| Subframe Connectors: | Welded type subframe connectors |
| Roll Bar / Cage: | Stock |
| Traction Devices: | Hotchkis uppers & lowers, quad delete |
| Miscellaneous: | Shock Tower brace, KYB Struts & Shocks |
| Body Specifications | |
| Hood Type: | Cervini SVO |
| Spoiler Type: | Stock |
| Miscellaneous: | T-Tops |
| Interior Specifications | |
| Interior: | Gray/Black |
| Tach / Shift Lite: | Auto Meter Monster tach w/shift light |
| Gauges: | Auto meter oil & temp in gauge cage, fuel pressure & vacumn gauge in pods located on cowl |
| Stereo System: | Stock |
| Alarm System: | None |
| Miscellaneous: | Battery relocated to hatch |
| General Specifications | |
| Amount Driven: | Nice Weather |
| Vehicle Weight: | Stock |
| Chassis Dyno HP: | Unknown |
| Chassis Dyno Torque: | Unknown |
| BEST 60 ft Time: | Unknown |
| BEST 1/4 ET: | Unknown |
| BEST 1/4 MPH: | Unknown |
| Extra Information from the Owner | |
|
New pics coming soon!
|
|
Return to the User's Rides listings index.
