User's Rides
|
Kevin
1983 Mustang GT , ON - Canada Red with Red Interior Modifications: Moderate ET Range: 13.0 - 13.9 |
| Current Media Files | |
|
|
|
| Engine Specifications | |
| Block: | 302 |
| Bore: | .030'over |
| Stroke: | 4.00' |
| Cubic Inches: | Stock |
| Crankshaft: | Stock |
| Compression: | 8.5-9.0 |
| Rods: | Stock |
| Pistons: | Stock |
| Rings: | Stock |
| Bearings: | Cleavite |
| Camshaft: | Comp Cams XE274H-10 |
| Timing Chain: | Cloyes double roller |
| Rockers: | Stock |
| Lifters: | Federal Mogol |
| Pushrods: | Crane |
| Oil Pump: | Stock |
| Oil Pan: | Stock |
| Ignition: | Crane Hi-6 and fireball coil |
| Pulleys: | Mac underdrives |
| Crank Dampner: | Stock |
| Engine Mounts: | 93 convertable mounts |
| Radiator: | Stock |
| Fan: | Electric |
| Water Pump: | Stewart stage 1 CW rotation. PN16133 |
| Miscellaneous: | None |
| Cylinder Head Specifications | |
| Brand & Model: | E7TE |
| Valves: | Stock |
| Port Work: | Home port polish |
| Components: | Crane Springs |
| Gaskets: | Fel Pro |
| Miscellaneous: | Comp Grind |
| Exhaust System Specifications | |
| Headers: | Hedman 1 5/8' |
| H-Pipe: | Hi-flow cats |
| Mufflers: | Flowmaster 2 1/2' |
| Tailpipes: | None |
| Miscellaneous: | None |
| Induction System Specifications | |
| Intake: | Edlebrock Performer RPM |
| Port Work: | Stock |
| T-Body / Carb: | Holley 600 vac. sec. |
| Mass Air: | Stock |
| Air Filter: | K/N |
| Ram Air: | Home Made |
| Miscellaneous: | None |
| Power Adder Specifications | |
| System Type: | Naturally Aspirated |
| System Manufacturer: | Stock |
| Pulley / Jet Size: | Stock |
| Boost / Nos Output: | Stock |
| Miscellaneous: | N/A here |
| Fuel System Specifications | |
| Fuel Pump(s): | Carter Electric |
| Fuel Lines: | 3/8' feed, 1/4' return |
| Fuel Rails: | Stock |
| Injs / Carb Jets: | .070' |
| Regulator: | Holley adjustable |
| Driver Type (CPU): | Stock |
| Computer Add-ons: | Stock |
| Miscellaneous: | None |
| Drivetrain Specifications | |
| Transmission: | Tremec 3550 |
| Flywheel / Converter: | FMS 10.5' |
| Clutch Setup: | Cobra clutch |
| Driveshaft: | FMS aluminum. |
| Axles: | Moser 31 spline |
| Differential: | 8.8 31 spline truck diff. |
| Gear Set: | 4:10 |
| Shifter: | Stock |
| Miscellaneous: | None |
| Chassis Specifications | |
| Springs: | Stock in front. 84 Cougar in the rear |
| Sway Bar Setup: | Stock 1.125' in front. .83' in the rear. |
| Rims: | ARE 15x7 |
| Tires: | 225/60/R15 in front. 255/65/R15 in rear. |
| Subframe Connectors: | Home made 2x2 tubular |
| Roll Bar / Cage: | Stock |
| Traction Devices: | Mega bite lowers, uppers boxed stock with urethane bushings |
| Miscellaneous: | None |
| Body Specifications | |
| Hood Type: | Stock with 82 hood scoupe. |
| Spoiler Type: | Stock |
| Miscellaneous: | None |
| Interior Specifications | |
| Interior: | Red |
| Tach / Shift Lite: | Autoguage 5' 10000 RPM |
| Gauges: | Autoguage 2 1/4' 3 pc. |
| Stereo System: | Stock |
| Alarm System: | Avital Tornado 2 |
| Miscellaneous: | None |
| General Specifications | |
| Amount Driven: | Nice Weather |
| Vehicle Weight: | 3200 |
| Chassis Dyno HP: | Unknown |
| Chassis Dyno Torque: | Unknown |
| BEST 60 ft Time: | 2.06 street 1.8 (8' cascar slick) |
| BEST 1/4 ET: | 13.403 street 13.076(8' cascar slick) |
| BEST 1/4 MPH: | 105.15 street 103.98(8' cascar slick) |
| Extra Information from the Owner | |
|
Working on making the vehicles driving manners better.
|
|
Return to the User's Rides listings index.
